Usage condition

● Shake up the bottle before use and avoid direct sunlight and dust.
● Wear a mask and gloves to avoid direct skin contact and maintain indoor ventilation.
● Recommended usage temperature: 20-25℃.
● Once the model is complete, please wash it with ethanol alcohol for at least 30 seconds or with dish wash liquid solution.

Attention

● When printing large model, please increase the build plate contact of the model or lower the infill density to avoid wrapping.
● Wash with plenty of water immediately if got accidently skin contact.
● If feel discomfort after you got skin contact, please see a doctor ASAP.
● Do not drink it and keep it sealed and out of the reach of children.

Storage

● Store in a dry and dust-free place under 15℃-35℃.
● Keep it sealed and keep it away from sunlight.